Here is a list of all functions, variables, defines, enums, and typedefs with links to the files they belong to:

- _ -

• _pfmt_writefunc_t : vsnprintf.c

- a -

• ADC_RESOLUTION : sysconfig.h
• AVR90USB : sysconfig.h
• AVR_CALIBRATE_TO_8MHZ : sysconfig.h

- b -

• BOTH : device_driver.h
• bt_device_config() : bluetooth.h , bluetooth.c
• bt_device_reset() : bluetooth.h , bluetooth.c
• bt_device_uc_config() : device_driver.h , device_driver_AVR90USB.c
• bzero : sysconfig.h

- c -

• CHAR_UNDEFINED : lcd.c
• CHIP_IN : sysconfig.h
• CHIP_OUT : sysconfig.h
• configure : bluetooth.h

- d -

• DD_SPI_ADC_CS : adc.h
• DD_SPI_LCD_CS : lcd.h
• DD_SPI_MISO : spi.h
• DD_SPI_MOSI : spi.h
• DD_SPI_SCK : spi.h
• DD_SPI_SS : spi.h
• DDR_SPI : spi.h
• DISPLAY_1_TO_7_BIAS : lcd.h
• DISPLAY_1_TO_9_BIAS : lcd.h
• DISPLAY_ADC_NORMAL : lcd.h
• DISPLAY_ADC_REVERSE : lcd.h
• DISPLAY_ALL_POINTS_OFF : lcd.h
• DISPLAY_ALL_POINTS_ON : lcd.h
• DISPLAY_blank_5PX : lcd.h
• DISPLAY_BOOSTER_RATIO_2x : lcd.h
• DISPLAY_BOOSTER_RATIO_3x : lcd.h
• DISPLAY_BOOSTER_RATIO_4x : lcd.h
• DISPLAY_BOOSTER_RATIO_5x : lcd.h
• DISPLAY_BOOSTER_RATIO_6x : lcd.h
• DISPLAY_BOOSTER_STEP_UP_VALUE : lcd.h
• DISPLAY_C_5PX : lcd.h
• DISPLAY_COLUMN_LOWER_BIT : lcd.h
• DISPLAY_COLUMN_UPPER_BIT : lcd.h
• DISPLAY_DEGREE_5PX : lcd.h
• DISPLAY_DISPLAY_NORMAL : lcd.h
• DISPLAY_DISPLAY_REVERSE : lcd.h
• DISPLAY_ELECTRIC_VOLUME_MODE : lcd.h
• DISPLAY_ELECTRIC_VOLUME_REGISTER : lcd.h
• DISPLAY_INTERNAL_RESISTOR_RATIO : lcd.h
• DISPLAY_NO_OPERATION : lcd.h
• DISPLAY_NORMAL_OUTPUT_DIRECTION : lcd.h
• DISPLAY_OFF : lcd.h
• DISPLAY_ON : lcd.h
• DISPLAY_PAGE_ADDRESS : lcd.h
• DISPLAY_POWER_CONTROL : lcd.h
• DISPLAY_POWERSAVE : lcd.h
• DISPLAY_RESET : lcd.h
• DISPLAY_REVERSE_OUTPUT_DIRECTION : lcd.h
• DISPLAY_START_LINE : lcd.h
• DISPLAY_STATIC_INDICATOR_OFF : lcd.h
• DISPLAY_STATIC_INDICATOR_ON : lcd.h
• DISPLAY_STATIC_INDICATOR_REGISTER : lcd.h

- e -

• EVEN_PARITY : device_driver.h

- f -

• F_CPU : test_usart.c
• FREQ_CPU : sysconfig.h

- g -

• G_FONT_DEFAULT_7PX : lcd.c
• get_temperature() : adc.h , adc.c
• graphic_view() : lcd.c , lcd.h
• gtime : my_delay.h , my_delay.c

- h -

• HIGH : sysconfig.h

- i -

• idle() : device_driver.h , device_driver_AVR90USB.c
• init() : device_driver_AVR90USB.c , device_driver.h
• init_lcd() : lcd.h , lcd.c
• init_timer() : device_driver.h
• init_timer0_ms() : device_driver.h , device_driver_AVR90USB.c
• init_timer0_us() : device_driver_AVR90USB.c , device_driver.h
• init_timer1_sec() : device_driver_AVR90USB.c , device_driver.h
• init_usart() : device_driver_AVR90USB.c , device_driver.h
• ISR() : device_driver_AVR90USB.c

- k -

• knight_rider() : device_driver.h , device_driver_AVR90USB.c

- l -

• LCD_12H_VISUALISATION : lcd.h
• lcd_clear() : lcd.h , lcd.c
• lcd_command() : lcd.h , lcd.c
• LCD_COMMAND_PIN : lcd.h
• lcd_data() : lcd.c , lcd.h
• LCD_PORT : lcd.h
• lcd_reset() : lcd.h , lcd.c
• LCD_RESET_PIN : lcd.h
• lcd_send_bitmask() : lcd.h , lcd.c
• lcd_send_char() : lcd.c , lcd.h
• lcd_send_string() : lcd.h , lcd.c
• lcd_set_column() : lcd.h
• lcd_set_start() : lcd.c , lcd.h
• LOW : sysconfig.h

- m -

• main() : main.c , test_usart.c
• MAX_MEASUREABLE_VALUES : sysconfig.h
• MAX_PRESCALER : sysconfig.h
• MAX_RS232_CHARACTERS : sysconfig.h
• MAX_SECONDS : sysconfig.h
• mirror_byte() : lcd.c , lcd.h
• my_delay() : my_delay.h , my_delay.c
• my_timeout() : my_delay.c , my_delay.h
• my_vsnprintf() : vsnprintf.c

- n -

• nexttemp() : print_temp.h
• NO_PARITY : device_driver.h

- o -

• ODD_PARITY : device_driver.h

- p -

• PAGE0 : lcd.h
• PAGE1 : lcd.h
• PAGE2 : lcd.h
• PAGE3 : lcd.h
• PAGE4 : lcd.h
• PAGE5 : lcd.h
• PAGE6 : lcd.h
• PAGE7 : lcd.h
• PAGE8 : lcd.h
• parity_val : device_driver.h
• Parity_val : device_driver.h
• PIXEL_5PX : lcd.h
• PIXEL_7PX : lcd.h
• PROGMEM : bluetooth.c , lcd.c
• PROPER_SPICON1 : spi.h

- r -

• READ : device_driver.h
• reset_uc_bt_device() : device_driver.h , device_driver_AVR90USB.c
• rs232_info : usart.c , usart.h
• rs232_struct : usart.h
• rs232_struct_delete : device_driver.h
• rs323_info_delete_options : device_driver.h

- s -

• SPI_CS_high() : spi.h , spi.c
• SPI_CS_low() : spi.c , spi.h
• SPI_MasterInit() : spi.h , spi.c
• SPI_MasterTransmit() : spi.c , spi.h
• SPI_PORT : spi.h
• start_temp : my_delay.h , my_delay.c
• switch_led() : device_driver_AVR90USB.c , device_driver.h

- t -

• T16BIT : sysconfig.h
• t_callback : my_delay.h , my_delay.c
• temperature() : print_temp.h , print_temp.c
• TMP_READ : device_driver.h

- u -

• UREF : sysconfig.h
• usart_clear_structure() : usart.c , usart.h
• usart_read() : usart.c , usart.h
• usart_uc_control_int() : device_driver.h , device_driver_AVR90USB.c
• usart_uc_read() : device_driver.h , device_driver_AVR90USB.c
• usart_uc_write() : device_driver_AVR90USB.c , device_driver.h
• usart_write() : usart.h , usart.c
• USE_ADC : sysconfig.h
• USE_LCD : sysconfig.h
• USE_SPI : sysconfig.h
• USE_USART : sysconfig.h

- w -

• WRITE : device_driver.h